Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 10-speed Freehub Conversion Kit for 2009-2012 188 Hub
$176.00
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed (Red), Campagnolo 10/11 Speed (Blue) - Material: Aluminum
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$136.99
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp 202 Firecrest Carbon Front Wheel (Clincher)
$1,226.99
Take flat-land speed into the mountains with Zipp’s 202 clinchers. Not only do these ultra-light wheels set the climbing standard in the WorldTour peloton, they also excel over rough roads and handle brilliantly in stiff crosswinds. The slippery profile of Zipp's 32mm-deep, 25.4mm-wide dimpled rims are more aerodynamic than many deep-section wheels. Zipp's smooth, tough hubs are laced with Sapim CX-Ray spokes for years of winning performances.
Zipp 30 Front Wheel (Clincher)
$389.99
Tick the miles away with Zipp’s 30 aluminum clinchers. Built on stiff, durable 30mm-deep rims, the 30s are rugged, light, and fast. The 21.5mm-wide tire bed enables supple cornering control and ride comfort while simultaneously minimizing pinch flats. Zipp’s stiff hubs offer seemingly endless miles of smooth riding, and they're laced with Sapim CX-Ray spokes so you can rest assured that your power gets transferred directly to the road.
Zipp 303 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,200.00
If perfection is the standard, then the 303 Firecrest Carbon Clincher wheelset delivers everything you could ask for, including a heritage forged in the Spring Classics. At the center of the 303 Firecrest Carbon Clincher is the 77/177 hubset, an innovation that results in improved aero performance, stiffness, braking, durability, simplicity, and versatility. The 303 Firecrest is light enough to climb up the steepest gradients with ease as a go-to all-around wheelset. - Improved 45mm rim profile – fast, stable, and versatile - ABLC Sawtooth dimple design helps manage airflow around the rim for a faster, more stable wheel - Industry leading Showstopper brake track: powerful and consistent braking, even on wet terrain - 77/177 hubset, reliable & durable, proven in the Spring Classics, no pre-load adjustment required - XDR driver body available for 1x setups - Sapim spokes & nipples - ISO 4210 compliant. See Declaration of Conformity for details
Whisky Parts Co. Tubeless Rim Tape
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Wheels Manufacturing Inc. Axle-09
$35.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-17
$36.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Hollow Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 110mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-19
$25.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-34
$55.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
Wheels Manufacturing Inc. Outer Axle Nut
$1.25 - $5.75
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Wheels Manufacturing Inc. Wheels Presta Valve Extension
$6.99
- Threads onto Presta valve stem for inflation with deep-V rim profiles - 76mm length
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Velocity Blunt SS 29-inch Disc Rim
$119.99
- Specifically designed to be best-in-class for XC use, light enough to win, tough enough to last - Shorter and thicker sidewalls for incredible durability even when paired with low pressure, tubeless tires - I-beam bead hook maximizes 26.6mm internal width for optimum tire performance
Surly Ultra New Disc Rear Hub
$99.99 - $105.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
Sunlite BB Axle Bolt
$1.99
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
Sunlite BB Axle Nut
$1.99
- Shell: 8mm flanged axle nut - Flanged
Sunlite Quick Release Skewer (Front, 100mm)
$6.99
- Replacement steel quick release skewers
Sunlite Replacement QR Skewer
$6.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Sun Ringle Cr-18 Rim
$34.99
Overkill? Maybe. Let’s just call it a rim you can ride over hill and dale without bothering to pack a spoke wrench. Product specs: - Sizes: 700c, 29-inch, 20-inch, 20x1 3/8-inch, 24-inch, 24x1-3/8-inch - Hole counts: 32, 36 - Width: 22.5mm
Sun Ringle MTX 33 Rim
$48.50 - $65.00
Product specs: - Size:24", 26", 29" - Width:33.5 - Bead width: 33.5mm - Inner bead width: 26mm - Section height: 25.5mm - Weight (26"): 660g - Sleeved or welded - Hole count: 32, 36
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$39.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti Hub Kit
$17.99 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's NoTubes 3.30HD 15mm Hub Kit
$20.00
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD QR Hub Kit
$24.99
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes Alloy Tubeless Valve Stems
$22.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Arch EX 27.5 Front Wheels
$294.99 - $445.00
Inspire confidence in your ride with the ZTR Arch EX. Proven in the Enduro World Series, but light enough to be a favorite among XC racers everywhere, the Arch EX is Stan's most versatile rim design. The patented low-profile Bead Socket Technology design offers superior tubeless compatibility for less rolling resistance, more control, and better traction. Lightweight performance is important, but the Arch EX was designed to let you maintain control on even the most technical of trails. For maximum durability, an internal arch reinforces the rim, adding strength and stiffness. Combined with a thicker spoke bed, the Arch EX is an ideal choice for more aggressive and heavier XC and trail riders. The Arch EX wheelset now includes the stronger, faster-engaging Neo hub system. The Neo's 100% CNC machined shell, larger bearings, and stronger, stiffer, shoulderless axle offer unmatched strength and reliability. Featuring four precision-engineered pawls and a 36-tooth ratchet ring, the Neo offers fast 10-degree engagement. With new SealLock endcaps, tool-free disassembly, and a huge range of options, the Arch EX wheelset with Neo hubs is here to make any bike faster and more reliable. - For trail and all mountain use - Stan's most versatile rim design - Bead Socket Technology (BST) for superior tubeless performance - Lightweight rim profile with reinforced internal arch - 24.6mm rim width increases tire volume for more control and less rolling resistance - Compatible with standard tires when used with or without tubes
Stan's NoTubes Arch EX 27.5 Rear Wheels (Shimano)
$354.99
Inspire confidence in your ride with the ZTR Arch EX. Proven in the Enduro World Series, but light enough to be a favorite among XC racers everywhere, the Arch EX is Stan's most versatile rim design. The patented low-profile Bead Socket Technology design offers superior tubeless compatibility for less rolling resistance, more control, and better traction. Lightweight performance is important, but the Arch EX was designed to let you maintain control on even the most technical of trails. For maximum durability, an internal arch reinforces the rim, adding strength and stiffness. Combined with a thicker spoke bed, the Arch EX is an ideal choice for more aggressive and heavier XC and trail riders. The Arch EX wheelset now includes the stronger, faster-engaging Neo hub system. The Neo's 100% CNC machined shell, larger bearings, and stronger, stiffer, shoulderless axle offer unmatched strength and reliability. Featuring four precision-engineered pawls and a 36-tooth ratchet ring, the Neo offers fast 10-degree engagement. With new SealLock endcaps, tool-free disassembly, and a huge range of options, the Arch EX wheelset with Neo hubs is here to make any bike faster and more reliable. - For trail and all mountain use - Stan's most versatile rim design - Bead Socket Technology (BST) for superior tubeless performance - Lightweight rim profile with reinforced internal arch - 24.6mm rim width increases tire volume for more control and less rolling resistance - Compatible with standard tires when used with or without tubes
Stan's NoTubes Crest 27.5 Front Wheels
$294.99 - $445.00
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
Stan's NoTubes Crest 27.5 Rear Wheels
$354.99
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). The Crest wheelset now includes the much stronger and faster-engaging Neo hub system. The Neo's larger bearings and a stronger, stiffer, shoulderless axle offer unmatched strength and durability. Featuring four precision pawls simultaneously engaging a 36-tooth ratchet ring for super-fast 10-degree engagement, the Neo also offers a 100% CNC machined hub shell and tool-free disassembly. New SealLock end caps stay put and make wheel installation a breeze. And with a huge range of options, including Boost, there's a Neo hub to fit just about any bike. Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
Stan's NoTubes Crest 29 Front Wheels
$294.99 - $445.00
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
Stan's NoTubes Cyclocross Tubeless Kit
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Cyclocross Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Rim Tape
$11.25 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Threaded Valve Extenders
$26.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Stan's NoTubes Tubeless Valve Stems
$15.99 - $16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sta-Tru 12-inch Front Wheel
$34.99
Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher
Sta-Tru 24-inch Front Wheel
$41.99 - $62.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher
Specialized Roval Titanium Quick Releases
$50.00 - $60.00
• Titanium axles with alloy hardware • Steel cam mechanism for longevity, and self-lubricating brass bushings
Specialized Stout XC 650b Front
$120.00
650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - Stainless spokes won't rust, easing long-term maintenance.
Specialized Stout XC 650b Wheelset
$275.00
650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes - Double-wall rims are strong and durable - Machined braking surface creates superior stopping power in any condition - Stainless spokes won't rust, easing long-term maintenance - 8-/9-speed cassette rear hub provides plenty of gearing options for climbing and riding the flats
Specialized Stout XC SL 29 Front
$115.00
The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
Specialized Stout XC SL 29 Rear
$140.00
The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
Soma Colored 14g Spokes
$1.35 - $52.16
- Straight gauge stainless steel, bag of 36, includes 14g silver nipples - 281mm lengths are for most high-flange track hubs and velocity deep V rims - 308mm spokes are designed to be cut and re-threaded for desired length
Shimano 105 Front Hub
$49.99
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smoothly and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
Shimano 105 Front Hub
$35.00 - $41.99 $41.99 Up to 17% Off
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
Shimano Alfine Centerlock Dynamo Hub
$120.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Shimano SLX Front Hub (15mm Through-Axle)
$62.08
Shimano's SLX 15mm through-axle hub is ready for the trails. This rock-solid hub features smooth-rolling and easy to service cup-and-cone bearings. The stout design minimizes fork flex, improves steering precision and builds into a super-solid wheel, perfect for today's long-travel, yet lightweight forks. All-mountain durability ensures that whether you're hammering uphill or sticking sick landings this robust hub will hold up ride after ride. Plus Shimano's Center Lock spline makes mounting the disc-brake rotor super easy.
Shimano Ultegra Front Hub
$79.99
Shimano's Ultegra Front Hub is the durable, lightweight heart of a race-ready front wheel. Super-polished ball races house ultra-smooth bearings to minimize rolling resistance and the hub's oversize aluminum shell design eliminates fork flex for stiff, responsive wheels. Plus, Shimano's labyrinth seals shut out dust, dirt and water for phenomenal durability. And, you get Shimano's superb quick-release skewer, too.
Saris Trainer Skewer
$14.99
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Salsa Deadbolt Ultralight Rear Thru-Axle
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation
Salsa Rear Stainless Flip-Off Skewer
$44.99
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
SRAM Quick Release Pair MTB
$32.00 - $50.00
SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.
SRAM XD Driver Body for Rise 60 Wheel
$62.00
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels. • Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog • Provides a stable hub connection
SRAM i-MOTION 3 Hub (Coaster Brake)
$87.00
Change gears any time: uphill, downhill, while pedaling or even sitting still with SRAM's i-MOTION Hub. You can explore new terrain with the 3-speed range and stop easily with the classic coaster brake. The internal shifting mechanism is protected inside the hub shell for excellent durability that's ready to go whenever you are. It's extremely low maintenance so all you have to do is enjoy the ride!
Roval Alpinist CLX Front
$1,100.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 562g
Roval Boost Conversion Kit
$54.99
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames. - Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts - Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset - Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation
Roval CLX 32 Disc Wheels
$1,100.00 - $1,400.00
The Roval CLX 32 Disc full-carbon clincher is the perfect performance disc wheel; light, stiff, and fast. The wide internal rim width provides an optimum tire profile for precise handling, stiffness, and aerodynamics. The Center Lock hub makes this an ideal wheel for the muddiest cross-race or fast paced ride. This wheel offers a non-SCS rear hub for traditional QR or 12mm thru-axle compatibility.
Roval CLX 32 Rear Wheel
$1,400.00
When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 rear clincher, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 730-gram, 21mm-wide (internal width) rear wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher rear wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 24 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 730g
Roval Control 29 Carbon Wheels
$1,200.00
One ride on a set of Roval's Control Carbon 29 wheels and you'll see what the hype around carbon wheels is all about. Stiffer, lighter, faster; what's not to love? This 1580 gram wheelset uses DT Swiss Revolution spokes and locking DT Swiss nipples laced to a 27mm-wide carbon rim. DT Swiss hub internals are always ready whenever you need to put the power down, and the 15mm/20mm/QR front hub and 135mm/142mm rear hub axle compatibly makes it easy to upgrade any bike.
Page 1 of 12 Next page