$10.00 - $49.99 $49.99 Up to 80% Off
Bontrager's Race Bullhorn is crafted from lightweight butted 2014 aluminum and uses internal cable routing for a slippery, wind-cheating profile.
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
The Zipp Vuka Alumina, crafted from 6066 series aluminum, offers a base bar with superior aerodynamics and ergonomics at an affordable price. - Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting - Sleek with clean internal cable routing for easy installation
$79.99 - $80.00 $80.00 On Sale
Profile's T2 Wing has a winged cross-section to slice through the air, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the T2 is super light and boasts a wide clamping section that will accept any Profile clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability.
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
The drag-defying profile of Bontrager's Elite Aero VR-CF Handlebar is proven to save up to 23 seconds per hour over a traditional round handlebar. Take advantage of the shaped 6066-T6 aluminum and internal routing, and bring your ride's aerodynamics to the next level. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Aero drop bar profile is more aerodynamic compared to traditional round bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant
- Aerofoil top section - 10 degrees tilted up bar ends - Within 3:1 UCI regulation - Internal cable routing - Weight 255g - 5mm drop - Hydroformed 6061 aluminum
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
$229.99 - $264.99
Profile's T1+ Clip-on Aerobars feature double ski-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The double bend places your wrists and hands in a neutral position that reduces the discomfort that can be found in more aggressive hand positions. The carbon fiber extensions keep weight down, while the forged brackets, with minimal, drag-reducing single-bolt J4 clamps, provide strength exactly where you need it. F-35a armrests offer 30mm of fore/aft adjustment and 15-degrees of rotation, giving you a fit and performance edge over your competition—whether it's other racers or your own personal record.
$230.00 - $255.00
Profile's T2+ Carbon Clip-on Aerobars feature carbon ergonomic S-bend extensions with 30mm of rise for lightness, durability, and a great fit. These clip-ons also boast Profile's F-35 anatomic armrests and their J4 brackets so that you have length, width and arm adjustments for easily achieving the perfect aero tuck.
Get your next time trial or triathlon off to the right start with Zipp's VukaBull Base Bar. It's the first thing you reach for when you blast out of the start gate, so Zipp takes extra care with the carbon layup to ensure you have the lightest, most robust bar possible. The slightly concave nose section and forward-swept arms, along with the airfoil shape, reduce drag and stiffen the bar. Ergonomics are the key to comfort and speed, so it's available with a choice of zero or 40mm drop and the grips are angled up slightly for a more natural wrist angle when climbing and sprinting. Additionally, it has an extra wide aerobar clamping area for maximum versatility and adjustability.
The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
Specialized's Carbon Aerobar with Aero Stem is the ultimate all-in-one, integrated cockpit option. With enough adjustability to fit any bike with a 1-1/8-inch steerer, the stable, aerodynamic 17-degree stem offers 60 or 90mm reach. For even more range, the 40-degree carbon ski-tip extensions offer 10mm of lateral jog for a wide range of arm widths and the included fit kit allows for up to 45mm of height adjustment. The full-carbon base bar with a steeply aero 4:1 cross section is light and stiff, and it's designed for use with internal cable routing for mechanical and electronic gruppos.
The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Perfectly match with Missile EVO clip-on aero extenders - Including 4 spacer adapters for under bar and top bar mounting - Ideally paired with the Missile EVO stem for optimal aerodynamics and optics - Weight: 295g
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Zipp's Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features leading adjustability; can be used with any stem to help you find your ideal position on the bike. The SRAM eTap AXS Blip Box fits neatly within the center cap, keeping it out of the wind and out of sight for a clean and efficient cockpit. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that's stiff and streamlined while maintaining the UCI's 3:1 aspect ratio requirement. - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately - New Center cap has an integrated mount for the SRAM eTap AXS Blip Box and keeps it hidden and out of the wind - Wide range of adjustment - Works on a wide range of integrated bikes - Works with any 31.8 clamp stem - Removable center cap, placed in front of the stem, adds 5 percent stiffness to the aero bar and integrates seamlessly to the base bar. - Integrated Carbon Aerobar works with any 31.8 clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - ISO 4210 compliant. See Declaration of Conformity for detail - Drop: 0mm - Clip compatible Integrated - Width (center-to-center): 40cm - Brake lever compatibility: Plug Style - Clamp width: 52mm
The Missile EVO is a full UD Carbon aerodynamic design that meets UCI requirements. It's ideal for applications where optimizing aerodynamics is critical. - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Integrated brake and shift cable routing (Also for Shimano Di2) - Weight: 595g
Page 1 of 1