Parts & Accessories

No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.

To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.

Keep your ears nice and toasty. Nutcase's removable ear pads provide comfort and warmth on those brisk and chilly rides. Compatible with Nutcase Street (Bike & Skate) and Little Nutty lines only. Not compatible with Metroride, Baby Nutty, Moto, Snow, or Water.

When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.

Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable

PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g

The PWR helmet extension mount is designed for use with the PWR modular lights. Use it to attach the lighthead to your helmet so you can stash the battery in your backpack. - Compatible with the PWR Road, PWR Trail, and PWR Mountain light heads - Internal screw is made of nylon plastic and is designed to snap in case of accidents for rider helmet protection - Fits most vented helmets, common for road and trail cycling - Stretched cable length: 80cm - Weight: 100g

The Jandd Helmet Cover offers protection from the elements. - 3M Reflective Tape is sewn to the front and back, additionally the back has a loop for a high-visibility flashing light - Made with 200 Nylon Oxford with a laminated urethane layer, heat sealed seams and sew holes - Fits most bike helmets and keeps water from penetrating - NOTE: One size does not fit all, this cover is intended for standard helmets without a visor

Bontrager's LockDown strap dividers are essential for a great fitting, secure helmet. No matter what happens, these original replacements will get them working like new. Key features: - Original replacement strap dividers for your Bontrager helmet - Compatible with all Bontrager helmets equipped with LockDown Straps

Helmet buckles work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. Key features - Original replacement buckles for your Bontrager helmet - Compatible with all Bontrager helmets

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Dipper helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

The key to getting your helmet fit pads stay put Bontrager helmet fit pads are affixed to the inside of the helmet via this Velcro kit. No matter what happens, these original replacements will get them sticking like new. Product details - Replacement adhesive Velcro kit - Compatible with all Bontrager helmets

These covers are key to keeping your Ballista helmet aero and cool. No matter what happens, these original replacements will get them working and looking like new. - Works perfectly with your Bontrager Ballista helmet - Original equipment replacement vent covers

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for Bontrager Dipper MIPS helmets - Not compatible with non-MIPS Bontrager Dipper helmets - Helmet fit pads should be replaced once per year to maintain fit and hygiene

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Ballista MIPS helmet - Also compatible with non-MIPS Bontrager Ballista helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

New pads can help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. New pads help your helmet fit best and smell fresh Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Circuit MIPS helmet - Also compatible with non-MIPS Bontrager Circuit helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Starvos MIPS helmet - Also compatible with non-MIPS Bontrager Starvos helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Product Details - Original equipment replacement fit pads for Bontrager Lithos helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Lithos or Rally helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Quantum MIPS helmet - Also compatible with non-MIPS Bontrager Quantum helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride. Key features - Original equipment replacement fit pads for your Bontrager Rally MIPS helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene

New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for Bontrager Rally MIPS helmet with Boa - Helmet fit pads should be replaced once per year to maintain fit and hygiene

New pads help your helmet to fit properly and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Solstice MIPS helmet - Compatible with Bontrager Solstice MIPS in Adult and Youth sizes - Helmet fit pads should be replaced once a year to maintain fit and hygiene

Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride. Key features - Original equipment replacement fit pads for your Bontrager Specter helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene

The NeoVisor keeps the sun and rain out of your eyes with a minimal design profile. We made it easily removable for those last-minute decisions before a race or in the midst of a ride. - Removable visor fits Bontrager helmets with FormFit brow bands - Hook and loop mounts make for easy mounting and removal while riding

Replacement visors keep your lids fresh Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Blaze WaveCel helmet - Original equipment replacement visor

Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. - Original replacement fit systems for your Bontrager helmet - Compatible with all Bontrager helmets with Micro Manager I or II fit systems

Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Lithos or Rally helmet - Original equipment replacement visor

Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Quantum helmet - Original equipment replacement visor

Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Solstice helmets including Youth models - Original equipment replacement visor